纬纶为您解读连接器的重要性 WEILLEN Understand the importance of connectors

设想一下如果没有连接器会是怎样?这时电路之间要用连续的导体永久性地连接在一起,例如电子装置要连接在电源上,必须把连接导线两端,与电子装置及电源通过某种方法(例如焊接)固定接牢。这样一来,无论对于生产还是使用,都带来了诸多不便。


以LED景观灯为例。从电源到灯座的距离一般都会比较大,如果从电源到灯座都是每根线从头到尾连接,那将会给施工带来不必要的麻烦,而且会造成线材浪费。有人会疑问,直接从火线开个缺口,将电线导电的部位接到一起,再缠上几层绝缘胶不也可以吗?


不一定非要用连接器。首先,绝缘胶布大多容易老化,存在安全隐患;其次直接用电线搭在一起的接头机械性能是很差的,线路稍微振动拉伸很容易造成断路,而且接口接触不良,容易造成发热,从而引发火灾;况且户外环境恶劣,防水防盐防老化等要求都会比较高,绝缘胶远达不到要求。但是如果在户外照明中使用高性能防水连接器,不仅简化了电网的安装,而且这一切的安全隐患都会降到很低的水平。

1605859833(1).jpg

这个例子简单的说明了连接器的好处。它使设计和生产过程更方便、更灵活,更加安全,也降低了生产和维护成本。 连接器的出现改善生产过程 连接器简化电子产品的装配过程,也简化了批量生产过程 易于维修 如果某电子元部件失效,装有连接器时可以快速更换失效元部件,便于升级 随着技术进步,装有连接器时可以更新元部件,用新的、更完善的元部件代替旧的 提高设计的灵活性使用连接器使工程师们在设计和集成新产品时,以及用元部件组成系统时,有更大的灵活性。


尤其是对工业连接器来说,有时候用在需要插拔的恶劣环境中,灵活与安全就显得更为重要。这时候带按扣的简易插拔连接器会是一个明智的选择。



Imagine what it would be like without connectors.

At this time, the circuit must be permanently connected with continuous conductors. For example, to connect the electronic device to the power supply, the two ends of the connecting wire must be firmly connected with the electronic device and the power supply through some method (such as welding).

So, no matter to produce or use, brought a lot of inconvenience.


Take the LED landscape lamp as an example.

The distance from the power supply to the lamp holder is usually large. If every wire from the power supply to the lamp holder is connected from the beginning to the end, it will bring unnecessary trouble to the construction and will cause wire waste.

Some people can doubt, open a gap from firewire directly, the place that electric wire conducts is joined together, wrap on a few insulation glue again not also ok?


You don't have to use connectors.

First of all, most of the insulation tape is easy to aging, there are safety hazards;

Secondly, the mechanical properties of the joints directly put together by wires are very poor. It is easy to break the circuit if the wires are slightly vibrated and stretched. In addition, poor interface contact is easy to cause heat, thus causing fire.

Besides outdoor environment is abominable, waterproof prevent salt to prevent aging to wait for a requirement to be met quite tall, insulation glue is far short of a requirement.

However, the use of high-performance waterproof connectors in outdoor lighting not only simplifies the installation of the power grid, but also reduces all the potential safety hazards to a very low level.


This example simply illustrates the benefits of connectors.

It makes the design and production process more convenient, more flexible, more secure, and reduces production and maintenance costs.

1605859833(1).jpg

Connector of improving production process simplified electronic product assembly process, also simplified the production process is easy to repair if some electronic components failure, can quickly change the failure components when equipped with a connector, easy to upgrade with technical progress, equipped with a connector can be updated when the components, with a new, better instead of the old improve the design of the components, the flexibility of using connectors to the engineers in the design and integration of new products, and use the components of system, the more flexibility.


Especially for industrial connectors, it is important to be flexible and safe when used in harsh environments where plugging is required.

A simple plug-in connector with a buckle is a wise choice at this point.



上一篇: 下一篇:浅谈各行业的电子连接器

Previous: Next:Brief talk about the electronic connector of each industry